What is included in the forklift maintenance

Web Design And Seo For www.china-webdesign.com

forklift fork extensions - China Manufacturer

Thank you for inquiry my forklift fork extensions, Tel：13989310707, E-mail: sales@steelmanattachment.com

http://www.forklift-fork.com/key-forklift-fork-extensions-150/

Here are 12 kinds of common maintenance procedures
 1, check the cylinder pressure or vacuum
 2, Check and adjust valve clearance.
 3, check the thermostat is working properly.
 4, check multiple directional control valves, lift cylinder, tilt cylinder, steering cylinder and the gear

pump is working properly.
 5, check the transmission shift work is normal.
 6, inspection and adjustment of hand, foot brake, brake pad and brake drum clearance.
 7, the replacement of the oil sump, check the crankcase ventilation taken over is in good condition, clean

oil filter and diesel filter elements.
 8, check the generator and starter motor installation is firm, attachment skid steer
clean and solid wiring connections, check the

carbon brushes and commutator wear.
 9, check the fan belt tight or too loose.
 10, check the wheels are fitted with solid tire pressure meets the requirement, and clear the debris embedded

in the tread.
 11, due to maintenance work and dismantled parts, reassembled forklift road test.
   (1) the braking performance under varying degrees,fork lift attachment
there should be no deviation, hunting. Tighten the hand

brake on steep slopes, reliable parking.
   (2) listen to the engine running in case of acceleration, deceleration, overloaded or no load, there is no
unusual noise.
   (3) road test for a period of mileage, you should check the brakes, transmission, front axle, the gear pump

at whether the overheating.
   (4) Fork aircraft vertical speed is normal, with or without shaking.
 12, check the diesel tank of fuel import filter whether to plug damage, and clean or replace the filter.