Electric Stacker electric forklift battery replacement method steps

Web Design And Seo For www.china-webdesign.com

bucket forks - China Manufacturer

Thank you for inquiry my bucket forks, Tel：13989310707, E-mail: sales@steelmanattachment.com

http://www.forklift-fork.com/key-bucket-forks-151/

Electric Stacker forklift replacement battery operating processes
1) Remove the battery retaining screw
2) remove the cable from the battery terminal
3) slide out or hanging out the battery
4) indicated above, the reverse proc ess of installing the battery, fastening and connected properly.
(Replace the battery Electric Stacker must be the same type)
Note
1) The charge should be in a well ventilated area, open the cover or remove the battery from the forklift in
2) Never allow the battery to be exposed to the fire,forklift buckets
the formation of explosive gases may cause a fire
3) never do temporary wiring or faulty wiring of
4) the terminal must be tensioning shall not be falling off, the cable insulation to be reliable.
5) the battery to be kept clean, dry, anti-static cloth to dust.
6) can not be placed on the battery of tools or other metal objects.
7) During charging, the electrolyte temperature not exceeding 45 ℃
8) charging the end you want to check the electrolyte fluid should be higher than the partition 15mm, under

normal circumstances, budget attachments
generally a week to recharge once distilled water.
9) Avoid contact with skin and acid, once in contact with plenty of soap, or consult a doctor
10) used batteries according to local regulations.