Sand body swing problem
Sand is a reference crusher works, and user specific usage information feedback combined with the advantages of the design of new and efficient system of sand equipment (stone crushing machine) with its typical use is to adapt to the current industry of artificial sand is The rod mill Sand, Impact Sand, straight-through Sand alternative.
Sand in the production process, the body swing, but the amplitude, if the body swing particularly severe, then there may be three reasons:
(1) may be more serious crusher impeller wearing parts wear. If the impeller on the wearing parts badly worn will result in the Sand internal operation time is not smooth, causing the swing is too large, this time as long as more pieces of wearing parts, Sand internal impeller to reach equilibrium;
(2) may feed particle size is too large equipment swing too large, Sand in the design time, the maximum feed size of the equipment is generally 4-5 cm, sand and gravel production line Generally speaking , equipment, feed grain degrees in the 3-4 cm finished the amount of sand can be achieved most, if the feed cause the device swing is too large, if the feed is too small, collision broken inadequate finished the amount of sand is difficult to achieve full compliance;
(3) Sand may also be impeller blockage, crushed stone production line if the impeller have obstructions can also cause uneven feeding, body swing is too large, as long as the impeller trail obstructions removed can solve the body to swing the big problem.
没有评论:
发表评论