Web Design And Seo For www.china-webdesign.com
Aluminium pin clip - China Manufacturer
Thank you for inquiry my Aluminium pin clip, Tel: 0086-577-61603900, E-MAIL:sales@steel-pipeclamp.com
http://www.steel-pipeclamp.com/key-Aluminium-pin-clip-41/
Stainless steel hose clamp installer: Assembly in the welding board assembly before, in order to better determine the direction of the clip, it is recommended that the first fixed at marked after welding on welding, embedded on the tube clip the lower half of the body, put required a fixed tube. And put on the other half hose clamp body and cover with screws tightened. Should not be soldered directly mounted the good pipe clamp base plate. Installed ground rail, rail welding based on, or attached with screws, followed by rail nut pushed orbit and turn 90 degrees to the lower half of the pipe clamp body embedded nut, put the tube to be fixed, and put folder on the half pipe on the body and cover with screws. Stacked assembly, the rails can be welded to the foundation, or screws first installed the upper and lower half pipe clamp body, put the required fixed tube sprinkle on half pipe clamp body, fixed with screws, locking cover to prevent it from rotating. Folder and then install the second pipe, as above. The elbow assembly, the assembly bends should be directly in front and rear portions of the elbow with Insein pipe folder fixed. Suggest such a support point for a fixed position.
